EXTERIOR FINISHER

 

Exterior Finisher

This position will be a manual labor position and the ability to follow directions is critical. This position will require common sense, logical thought processes, and the ability to work in a safety-conscious manner. This position requires the employee to wear all required PPE.

The physical demands will be standing, walking, crouching, stooping, kneeling, squatting, and bending for long periods of time on a regular basis. This job will require a full range of body movements including but not limited to, the use of hands, feet, arms, legs, back, and torso; the ability to push, pull and lift. Must be able to lift and carry 100 lbs. repeatedly or continuously over time without “giving out” or fatiguing. Excellent eyesight, with or without correction, is necessary.

Work will be conducted under various weather conditions and temperatures such as extreme heat or cold and will be primarily outdoors.

On a regular basis there will a possible exposure to the following:
1. Chemicals, dust, fumes, and other airborne particles from construction equipment
2. Direct exposure to fresh concrete which can be caustic
3. Vibrations from construction equipment
4. Typical construction noise that may exceed normal decibel levels

  • Job Duties:

  • All duties that are associated with the installer job description will apply to this position

b. Assist in organizing tools and materials needed for the current days’ work as well as planning for tomorrow. Load and unload trucks as required.
c. Take necessary measures to protect adjacent surfaces and structures from splatters, damage, etc. during concrete placement.
d. Use and care of hand tools associated with finishing.
e. Use and care of power tools such as lasers, circular saws, cordless tools, etc.

  • Experience working with equipment such as boom lifts, scissor lifts, and forklifts

  • Ability to comprehend schematic diagrams, blueprints, sketches, building plans and other specifications required by our client for information pertaining to the type of material required to get the job done

  • High standard of integrity and professionalism

  • Selecting, measuring and marking materials for exterior siding, trim or stairs

j. Conduct the correct steps to obtain the specified finish required for the job
k. Cutting and shaping materials and joining them with nails, screws, bolts or glue
l. Removing damaged or defective parts or sections of structures and repair or replace, using hand tools

  • Ability to accurately measure lengths with ruler or tape

.

  • Equipment/Vehicle Operation:

  • Must have the ability to operate equipment such as skid steers, excavators, backhoes, forklifts, power finishing trowels, and motor vehicles.

b. Conduct and document daily pre-trip and pre-startup inspections of any vehicle or equipment to be operated. Report any faulty or non-functioning items immediately to your supervisor.
c. Have knowledge in the safe and correct way to operate required equipment and vehicles. Do not operate any equipment or vehicles unless properly licensed and trained.
d. Must obey all applicable traffic laws and safety procedures, such as seatbelt usage, etc.

  • Clerical/Other:

  • Accurately maintain and complete the weekly biometric time punches.

b. Report all near misses, incidents, or accidents to the job site supervisor. This is critical in the improvement of our safety culture.
c. Promptly report any and all mechanical problems with equipment or vehicles as well as any needed supplies for the job site.

Additional Responsibilities:

  • All other duties required by the President or your Supervisor

b. Follow all policies and procedures as set forth in the Employee Handbook and Corporate Safety Program

Job Type: Full-time

Pay: $12.00 - $22.00 per hour

Benefits:

  • 401(k)

  • AFLAC immediate upon hire

  • Life Insurance

  • Paid time off

Schedule:

  • 8-hour shift